1. Wrong trade size
Check the stamp against what you ordered, and remember that height comes first. A 20×16 and a 16×20 are different filters. See nominal vs. actual size.

2. Wrong depth
Most standard filters are close to 2" deep, but some hoods take other depths. A filter that's too thick won't seat, and one that's too thin rattles.
3. Hooks and handles
Hooked hoods need hooked filters, and fixed handles can clash with neighbouring filters. See mounting styles.
4. Warped frames
Dropped or overheated filters bow. Lay the filter on a flat surface; if a corner lifts, replace it.
5. Gaps in the bank
If the combination doesn't fill the opening, run the size calculator and ask the hood maker about listed filler panels. Never use foil or cardboard.


