Tools
- Tape measure (metal preferred)
- Notepad or phone photo of the size stamp
- Gloves if filters are greasy

Measure in place
- Cool and safe: shut down appliances under the hood as needed; watch for hot grease.
- Remove one filter carefully, noting handle orientation.
- Width and height: measure the metal frame, not only the baffle opening.
- Depth / thickness: measure front to back; many commercial baffles are about 1.5–2 inches deep, but verify.
- Count the set and note any odd sizes at the ends of the hood.
Common commercial sizes
Exact inventories vary by hood brand, but you will often see sizes in the neighborhood of 16×20, 16×25, 20×20 and 20×25 inches. Always match your measurement or the stamped size on the filter edge.
Fit tips
- Order the full set when several panels are warped so gaps do not open between old and new.
- Confirm whether your hood uses channel, spring clips or a lip that needs a specific depth.
- If a filter falls through or rattles loosely, stop and re-check size before cooking.

