- Baffle filter
- A grease filter made of interlocking metal channels that force air to change direction so grease separates out.
- Type I hood
- A hood over grease- or smoke-producing appliances. It needs listed grease filters and usually fire suppression.
- Type II hood
- A hood for heat, steam and vapors without grease, such as over dish machines.
- Trade (nominal) size
- The rounded size a filter is sold by, height first, for example 20 x 20.
- Actual size
- The real frame dimensions, usually about 3/8 inch smaller than trade size each way.
- UL 1046
- The US safety standard for grease filters used in exhaust ducts.
- AHJ
- Authority having jurisdiction: the fire marshal, building official or other body that enforces codes locally.
- NFPA 96
- The NFPA standard covering ventilation control and fire protection of commercial cooking operations.
- IMC 507
- The International Mechanical Code section on commercial kitchen hoods.
- Plenum
- The space behind the filters where filtered air collects before entering the duct.
- Grease duct
- The welded duct that carries exhaust from a Type I hood to the outside.
- Upblast fan
- A rooftop fan that discharges kitchen exhaust upward, away from the roof.
- Spark arrester
- A device that stops embers from solid-fuel cooking entering the filters and duct.
- Filter exchange
- A service that swaps in clean filters on a schedule and cleans the dirty ones off-site.
- FOG
- Fats, oils and grease, which many wastewater systems regulate.
- Static pressure
- Resistance to airflow. Clogged or very fine filters raise it, so the fan has to work harder.
Resource
Hood filter glossary
Short, plain-English definitions of the terms you'll hear from suppliers, inspectors and hood cleaners.



