hood-filter.com is for sale — buy the domain, or the domain plus this complete website →

Filter type

Mesh hood filters

Layered mesh is inexpensive and light. It can work, but only with frequent cleaning and the right application.

Mesh hood filters

What mesh filters are

Mesh filters stack layers of expanded aluminum or stainless mesh in a frame. Grease sticks to the wire surfaces as air passes through. They are common on lighter-duty or older systems and as a low-cost replacement option.

Aluminum mesh commercial kitchen grease filter on a stainless table

Pros

  • Lower upfront cost
  • Light and easy to handle
  • Widely available in common sizes

Cons

  • Grease and lint pack the mesh, raising fire fuel and cutting airflow
  • Harder to clean completely once deeply loaded
  • Often not the preferred choice for heavy fry production
  • Aluminum can warp or pit with harsh chemicals and high heat

Typical costs

About $15–$45 per filter for common commercial sizes. Replace sooner if mesh is crushed, gaps appear, or grease will not wash out.

NFPA 96 doesn't allow mesh filters unless they've been evaluated as an integral part of a listed hood or listed grease filter assembly. If your Type I hood is listed for baffle filters, don't substitute mesh. Confirm with the manufacturer and your inspector. Source: NFPA 96 via UpCodes.

Frequently asked questions

Is mesh OK over a fryer?

Heavy fry production usually favors baffle filters. If you use mesh, expect much more frequent cleaning and confirm it is allowed for your hood.

How often should mesh be cleaned?

Often daily in busy kitchens, because mesh loads faster than baffles.

Need a full set that fits the first time?

Send your hood opening or the size stamped on your old filters. We'll come back with matching sizes, quantities and options.

Get a quote
Size calculatorGet a quote