The convention
Filters are sold by trade size, height × width, in whole inches. The frame is typically 3/8" smaller in each direction so it can slide into the hood channel. On standard baffles, depth is usually 2" nominal, or about 1-7/8" actual.
Conversion table
| Trade | Actual (typical) |
|---|---|
| 10 × 16 | 9-5/8 × 15-5/8 |
| 10 × 20 | 9-5/8 × 19-5/8 |
| 12 × 16 | 11-5/8 × 15-5/8 |
| 12 × 20 | 11-5/8 × 19-5/8 |
| 12 × 24 | 11-5/8 × 23-5/8 |
| 16 × 16 | 15-5/8 × 15-5/8 |
| 16 × 20 | 15-5/8 × 19-5/8 |
| 16 × 25 | 15-5/8 × 24-5/8 |
| 20 × 10 | 19-5/8 × 9-5/8 |
| 20 × 16 | 19-5/8 × 15-5/8 |
| 20 × 20 | 19-5/8 × 19-5/8 |
| 20 × 25 | 19-5/8 × 24-5/8 |
| 25 × 16 | 24-5/8 × 15-5/8 |
| 25 × 20 | 24-5/8 × 19-5/8 |
Rounding
If you measure an old filter and get an odd fraction such as 19-5/8, round up to the nearest standard trade size, which is 20 here. If your measurements don't land near any standard size, you may have a custom filter, so ask your hood manufacturer.
Double-check before ordering
- Height first, width second
- Depth matches the old filter
- Hooks or handles match
- Baffles run vertically when installed
Sources
- HoodFilters.com: hood filter sizing quick-reference (PDF) (accessed November 9, 2026)


